Qui-Kone® Single Cone Drill Bits

 

CUT  PART#   PRICE    CONNECTION         RIG CLASS                             PERFECT FOR:

D24x40A, D24x40 Series 2, D33x44, D36x50, D36x50 Series 2, JT25, JT2720, JT2720 Mach 1, AT2720, JT3020 Mach 1, AT3020, JT4020, JT4020 Mach 1

D24x40A, D24x40 Series 2, D33x44, D36x50, D36x50 Series 2, JT25, JT2720, JT2720 Mach 1, AT2720, JT3020 Mach 1, AT3020, JT4020, JT4020 Mach 1

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D100x120, D100x120 Series 2, D100x140, JT100, AT100

D7x11, D7x11 Series 2, D9x13 Series 2, D10x14, D10x15, D16x20, D16x20 Series 2, D18x22, D20x22, D20x22 Series 2, D20x22FX, JT920, JT920L, JT921, JT922, JT1220, JT1220 Mach 1, JT1720, JT1720 Mach 1, JT2020 Mach 1

D330x500, D500x500

CUT  PART#   PRICE    CONNECTION         RIG CLASS                             PERFECT FOR:

D24x40A, D24x40 Series 2, D33x44, D36x50, D36x50 Series 2, JT25, JT2720, JT2720 Mach 1, AT2720, JT3020 Mach 1, AT3020, JT4020, JT4020 Mach 1

D24x40A, D24x40 Series 2, D33x44, D36x50, D36x50 Series 2, JT25, JT2720, JT2720 Mach 1, AT2720, JT3020 Mach 1, AT3020, JT4020, JT4020 Mach 1

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D100x120, D100x120 Series 2, D100x140, JT100, AT100

D7x11, D7x11 Series 2, D9x13 Series 2, D10x14, D10x15, D16x20, D16x20 Series 2, D18x22, D20x22, D20x22 Series 2, D20x22FX, JT920, JT920L, JT921, JT922, JT1220, JT1220 Mach 1, JT1720, JT1720 Mach 1, JT2020 Mach 1

D330x500, D500x500

HDD_Tool_Replacement_Part.html
Drillhead_HDD_Dealers.html
CATALOGHDD_Catalog.html
PARTSHDD_Catalog.html
Bolt_on_HDD_Bits_and_Blades.html

Available in 4” - 12”

Any connection.

For medium to hard formations.

The best performing, longest lasting single cone bit on the market. Larger bearings than any other single cone bit, optimal cone angle and the only continuous lubrication system in the industry.


The Qui-Kone® XL (Extended Life) single cone bit’s Patent Pending design is the only single cone bit made with a Grease Compensation system. (The system used in virtually all tri-cone bits to extend bearing life.) Drillhead’s proprietary design has a grease compensator/bearing lubrication system; providing you with longer bit life and less downtime, saving you money.

The leading design in hard rock boring. The Qui-Kone® easily penetrates through anything from had-packed dirt to extremely hard rock and provides excellent steering while doing it.


Qui-Kone® single roller cone bits have the largest bearings in the HDD industry. Sealed bearings provide much longer bearing life than competitors’ bits. Massive carbide wear pads provide better wear resistance than brazed-on carbide. Available with various cutter configurations for optimal performance in everything from soft ground to extremely hard rock. Available in TCI or Mill Tooth.


A great choice when the ground is too hard for a tri-point style rock bit such as the Rok-Klaw™ or other similar bits.


Qui-Kone
® bits are rebuildable, maximizing your investment.

  1. No other single cone bit lasts as long

  2. Patent Pending technology

  3. Exceptional steer-ability in any formation, from dirt to very hard rock

  4. Available in various cutting structures for any drilling condition

  5. Extended bearing life compared to all other single roller cone bits

  6. Sealed bearings for longer life

  7. Steers by oscillating or “carving”

  8. Rebuildable

  1. Larger bearings and longer bearing life than any other single cone bit

  2. Unmatched performance compared to any other single roller cone bit

  3. Exceptional steering in any formation, from dirt to hard rock

  4. Rebuildable

Qui-Kone® TCI

Qui-Kone® Mill Tooth

Available in 4” - 12”

Any connection.

For soft to medium formations.

Qui-Kone® XL TCI

Qui-Kone® XL Mill Tooth

Available in 4” - 12”

Any connection.

For medium to hard formations.

Available in 4” - 12”

Any connection.

For soft to medium formations.

©2013 Drillhead, Inc. HDD Tools and Horizontal Directional Drill Bits. All rights reserved. No re-use or distribution of any content.

Ditch Witch® is a registered trademark of The Charles Machine Works Inc.

Vermeer® is a registered trademark of Vermeer Manufacturing Company Inc.

American Augers® is a registered trademark of American Augers Inc.

CLICK HEREBolt_on_HDD_Bits_and_Blades.html
REBUILD SERVICEContact_Us.html

Need a tool or bit rebuilt? Factory rebuild service available on any drilling tool.

CONTACT US

Sizes up to 12” available, call for pricing.

Qui-Kone® TCI (Sealed Bearings)

CUT  PART#   PRICE    CONNECTION         RIG CLASS                             PERFECT FOR:

Sizes up to 12” available, call for pricing.

Qui-Kone® Mill Tooth (Sealed Bearings)

Sizes up to 12” available, call for pricing.

Qui-Kone® XL TCI

Sizes up to 12” available, call for pricing.

Qui-Kone® XL Mill Tooth

4”      Q400      $1,350     2” IF Pin                         7-44K

4”      Q401      $1,350     2 3/8” (2.375”) Reg. Pin    7-44K

5”      Q500      $1,950     2” IF Pin                        12-44K

5”      Q501      $1,950     2 3/8” (2.375”) Reg. Pin    12-80K

5”      Q502      $1,950     2 7/8” (2.875”) Reg. Pin    12-100K

6”      Q601      $1,950     2 3/8” (2.375”) Reg. Pin     24-100K

6”      Q602      $1,950     2 7/8” (2.875) Reg. Pin      24-100K

6”      Q603      $1,950     3 1/2” (3.5”) Reg. Pin         24-250K

7”      Q700      $2,250     2 3/8” (2.375”) Reg. Pin     40-100K

7”      Q701      $2,250     2 7/8” (2.875”) Reg. Pin     40-250K

7”      Q702      $2,250     3 1/2” (3.5”) Reg. Pin         40-250K

8”      Q800      $3,350     4 1/2” (4.5”) Reg. Pin         80K+

Single cone rock bits built for maximum performance and longevity. Qui-Kone® single roller cone bits are built with the largest bearings in the industry and we only use sealed bearings, greatly increasing bit life. Qui-Kone® bits often run 3 to 4 times longer than any competitors’ single cone rock bits.

4”      Q400T    $1,350     2” IF Pin                         7-44K

4”      Q401T    $1,350     2 3/8” (2.375”) Reg. Pin    7-44K

5”      Q500T    $1,950     2” IF Pin                        12-44K

5”      Q501T    $1,950     2 3/8” (2.375”) Reg. Pin    12-80K

5”      Q502T    $1,950     2 7/8” (2.875”) Reg. Pin    12-100K

6”      Q601T    $1,950     2 3/8” (2.375”) Reg. Pin     24-100K

6”      Q602T    $1,950     2 7/8” (2.875) Reg. Pin      24-100K

6”      Q603T    $1,950     3 1/2” (3.5”) Reg. Pin         24-250K

7”      Q700T    $2,250     2 3/8” (2.375”) Reg. Pin     40-100K

7”      Q701T    $2,250     2 7/8” (2.875”) Reg. Pin     40-250K

7”      Q702T    $2,250     3 1/2” (3.5”) Reg. Pin         40-250K

8”      Q800T    $3,350     4 1/2” (4.5”) Reg. Pin         80K+

4”     QXL400   $1,950    2” IF Pin                         7-44K

4”     QXL401   $1,950    2 3/8” (2.375”) Reg. Pin    7-44K

5”     QXL500   $2,450    2” IF Pin                         12-44K

5”     QXL501   $2,450    2 3/8” (2.375”) Reg. Pin    12-80K

5”     QXL502   $2,450    2 7/8” (2.875”) Reg. Pin    12-100K

6”     QXL601   $3,150    2 3/8” (2.375”) Reg. Pin     24-100K

6”     QXL602   $3,150    2 7/8” (2.875) Reg. Pin      24-100K

6”     QXL603   $3,150    3 1/2” (3.5”) Reg. Pin         24-250K

7”     QXL700   $3,350    2 3/8” (2.375”) Reg. Pin     40-100K

7”     QXL701   $3,350    2 7/8” (2.875”) Reg. Pin     40-250K

7”     QXL702   $3,350    3 1/2” (3.5”) Reg. Pin         40-250K

8”     QXL800   $3,350    4 1/2” (4.5”) Reg. Pin         80K+

4”     QXL400T   $1,950    2” IF Pin                         7-44K

4”     QXL401T   $1,950    2 3/8” (2.375”) Reg. PIn    7-44K

5”     QXL500T   $2,450    2” IF Pin                         12-44K

5”     QXL501T   $2,450    2 3/8” (2.375”) Reg. Pin    12-80K

5”     QXL502T   $2,450    2 7/8” (2.875”) Reg. Pin    12-100K

6”     QXL601T   $3,150    2 3/8” (2.375”) Reg. Pin     24-100K

6”     QXL602T   $3,150    2 7/8” (2.875) Reg. Pin      24-100K

6”     QXL603T   $3,150    3 1/2” (3.5”) Reg. Pin         24-250K

7”     QXL700T   $3,350    2 3/8” (2.375”) Reg. Pin     40-100K

7”     QXL701T   $3,350    2 7/8” (2.875”) Reg. Pin     40-250K

7”     QXL702T   $3,350    3 1/2” (3.5”) Reg. Pin         40-250K

8”     QXL800T   $3,350    4 1/2” (4.5”) Reg. Pin         80K+

HDD_Back_Reamers___Hole_Openers.html
Bolt_on_HDD_Bits_and_Blades.html
HDD_Tools_and_Tooling.html
Rok-Klaw_HDD_Rock_Bits.html
Qui-Klaw_Claw_Bits.html
Shovelhead_Directional_HDD_Drill_Bit.html
Tri-Cone_Drill_Bits.html
Directional_Diamond_HDD_PDC_Bits_HDD.html
REAMERSHDD_Back_Reamers___Hole_Openers.html
BOLT-ON
BITSBolt_on_HDD_Bits_and_Blades.html
L.I.T.H.
LEAVE IN THE HOLEHDD_Tools_and_Tooling.html
ROCK BITSRok-Klaw_HDD_Rock_Bits.html
SINGLE CONE
CLAW BITSQui-Klaw_Claw_Bits.html
SHOVELHEADShovelhead_Directional_HDD_Drill_Bit.html
TRI-CONETri-Cone_Drill_Bits.html
PDC BITSDirectional_Diamond_HDD_PDC_Bits_HDD.html
HOMEDrillhead_Inc._HDD_Tools_Horizontal_Directional_Drill_Bits_and_Tooling.html
PRODUCTSChoose_The_Right_Bit.html
ABOUT USAbout_Drillhead_HDD.html
CONTACT USContact_Us.html
REBUILD SERVICEPDC_Rebuild_Service.html
CUSTOM TOOLINGHDD_Tools_and_Tooling.html

D24x40A, D24x40 Series 2, D33x44, D36x50, D36x50 Series 2, JT25, JT2720, JT2720 Mach 1, AT2720, JT3020 Mach 1, AT3020, JT4020, JT4020 Mach 1

D24x40A, D24x40 Series 2, D33x44, D36x50, D36x50 Series 2, JT25, JT2720, JT2720 Mach 1, AT2720, JT3020 Mach 1, AT3020, JT4020, JT4020 Mach 1

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D100x120, D100x120 Series 2, D100x140, JT100, AT100

D7x11, D7x11 Series 2, D9x13 Series 2, D10x14, D10x15, D16x20, D16x20 Series 2, D18x22, D20x22, D20x22 Series 2, D20x22FX, JT920, JT920L, JT921, JT922, JT1220, JT1220 Mach 1, JT1720, JT1720 Mach 1, JT2020 Mach 1

D330x500, D500x500

CUT  PART#   PRICE    CONNECTION         RIG CLASS                             PERFECT FOR:

D24x40A, D24x40 Series 2, D33x44, D36x50, D36x50 Series 2, JT25, JT2720, JT2720 Mach 1, AT2720, JT3020 Mach 1, AT3020, JT4020, JT4020 Mach 1

D24x40A, D24x40 Series 2, D33x44, D36x50, D36x50 Series 2, JT25, JT2720, JT2720 Mach 1, AT2720, JT3020 Mach 1, AT3020, JT4020, JT4020 Mach 1

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D50x100A, D60x90, D80x100 Series 2, D100x120, D100x120 Series 2, D100x140, JT7020 Mach 1, JT8020 Mach 1, JT100

D100x120, D100x120 Series 2, D100x140, JT100, AT100

D7x11, D7x11 Series 2, D9x13 Series 2, D10x14, D10x15, D16x20, D16x20 Series 2, D18x22, D20x22, D20x22 Series 2, D20x22FX, JT920, JT920L, JT921, JT922, JT1220, JT1220 Mach 1, JT1720, JT1720 Mach 1, JT2020 Mach 1

D330x500, D500x500